Follow these steps to replace the wheel:

1. Push the latch in the opposite direction of the wheel (hold it in place).
   
   
2. Pull the wheel towards you to remove it.
   
   
3. Align the new wheel with the hole and insert it.
   
   
4. Release the locking latch to secure the wheel in place.

That’s it! Your suitcase is ready to roll again.

Follow these steps to replace the handle:

1. Open the zipper of the inner lining.
   
   
2. Unscrew the 5 screws.
   
   
3. Remove the old trolley handle.
   
   
4. Screw in the new trolley handle.
   

And you’re done! Your suitcase is as good as new.

Follow these steps to replace the wheel:

1. Remove the screw and its nut.
   
2. Take out the old wheel.
   
3. Attach the new wheel by screwing it in place.

And you’re all set—your suitcase is ready to roll!

Follow these steps to replace the handle:

1. Open the suitcase.
   
2. Unzip the hidden zipper in the middle of the lining.
   
3. Use a cross-head screwdriver to unscrew the internal part holding the handle in place.
   
4. Remove the internal part and the external handle.
   
5. Take your new handle and screw both the internal and external parts back into place with the screwdriver.

And that’s it! Your suitcase is ready for use with a brand-new handle.

Follow these steps to replace the rail:

1. Open the suitcase.
   
2. Unzip the hidden zipper in the middle of the lining.
   
3. Use a cross-head screwdriver to unscrew the screws holding the rail in place.
   
4. Replace with the new screws and rail.
   
5. Close the lining.

Your suitcase is now ready with a fresh new rail!

Follow these steps to replace the elastic cord:

1. Open the suitcase.
2. Unzip the hidden zipper in the middle of the lining.
3. Cut any knots if needed to remove the old elastic cord.
4. Thread the new cord through.
5. Leave about 20 cm of cord outside, then tie knots at both ends.
6. Close the lining.

Your suitcase is now ready with a new elastic cord!